Delete nixos/os-installation.sh

It's content were fully replaced by public/nixos/burn.sh and
public/nixos/install.sh.

Both are already accessible online (through
https://euandre.org/dotfiles/nixos/burn.sh).

1 files changed, 0 insertions, 114 deletions

diff --git a/nixos/os-installation.sh b/nixos/os-installation.sh
deleted file mode 100644
index 519ee5a..0000000
--- a/nixos/os-installation.sh
+++ /dev/null
@@ -1,114 +0,0 @@
-# Use GUI: it handles Wifi better!
-
-# Check the devices and it's partitions:
-lsblk # to check the device names and sizes
-
-# If under /dev/sdc and mounted:
-sudo umount /dev/sdc1
-
-# Put the OS image on the USB stick:
-sudo dd if=nixos.iso of=/dev/sdc #
-
-
-# Derived from:
-# https://www.maketecheasier.com/nixos-review/
-# https://chris-martin.org/2015/installing-nixos
-
-# First, get an internet connection.
-# The easiest way is to start the GUI and use the network manager applet:
-systemctl start display-manager
-# If the ISO doesn't contain GUI, try getting an internet connection either by using an ethernet cable or using =wpa_supplicant=:
-# https://wiki.archlinux.org/index.php/WPA_supplicant
-# wpa_supplicant -B -i wlp2s0 -c <(wpa_passphrase SSID PASSPHRASE)
-
-# Change keyboard to pt_BR layout:
-loadkeys br-abnt2
-
-# Format disk:
-gdisk /dev/nvme0n1 # disk found using lsblk
-
-# START Steps within gdisk
-
-d # first, delete all partitions with `d`
-o # create a new GUID partition table (GPT)
-
-## Create the BIOS boot partition
-n # create new partition
-1 # partition number
-ENTER # use default first sector
-+1M # partition size of 1MB
-EF02 # set partition type to "BIOS boot partition"
-
-## Create the EFI System Partition
-n # create new partition
-2 # partition number
-ENTER # use default first sector
-+500M # partition size of 500MB
-EF00 # set partition type to "EFI System"
-
-## Create the Linux LVM (where LUKS goes)
-n # create new partition
-3 # partition number
-ENTER # use default first sector
-ENTER # partition size is the remaining of the disk
-8E00 # set partition type to "Linux LVM"
-
-w
-# END Steps within gdisk
-
-cryptsetup luksFormat /dev/nvme0n1p3 # Initialize the encrypted partition
-cryptsetup luksOpen /dev/nvme0n1p3 enc-pv # Open encrypted partition volume
-
-pvcreate /dev/mapper/enc-pv
-vgcreate vg /dev/mapper/enc-pv
-lvcreate -n swap vg -L 10G
-lvcreate -n root vg -l 100%FREE
-
-mkfs.vfat -n BOOT /dev/nvme0n1p2
-mkfs.ext4 -L root /dev/vg/root
-mkswap -L swap /dev/vg/swap
-
-mount /dev/vg/root /mnt
-mkdir /mnt/boot
-mount /dev/nvme0n1p2 /mnt/boot
-swapon /dev/vg/swap
-
-nixos-generate-config --root /mnt
-
-# START Edit NixOS configuration file
-vi /mnt/etc/nixos/configuration.nix
-
-# System configuration:
-boot.initrd.luks.devices = [
-  {
-    name = "root";
-    device = "/dev/sda3";
-    preLVM = true;
-  }
-];
-boot.loader.grub.device = "/dev/sda";
-
-# Initial package set:
-enviroment.systemPackages = with pkgs; [
-  wget
-  vim
-]
-
-# END
-
-nixos-install
-
-# OS will prompt for root UNIX password
-
-reboot
-
-
-C-M-<F1>
-  useradd -m andreh
-  passwd andreh
-  # Setup UNIX password (for andreh)
-
-  sudo vi /etc/sudoers
-  # START Add the following line below the `root` line
-    andreh      ALL=(ALL) ALL
-  # END