# Edit this configuration file to define what should be installed on
# your system.  Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running ‘nixos-help’).

{ config, pkgs, ... }:

{
  imports = [ # Include the results of the hardware scan.
    ./hardware-configuration.nix
  ];

  # Use the GRUB 2 boot loader.
  boot.loader.grub.enable = true;
  boot.loader.grub.version = 2;
  # boot.loader.grub.efiSupport = true;
  # boot.loader.grub.efiInstallAsRemovable = true;
  # boot.loader.efi.efiSysMountPoint = "/boot/efi";
  # Define on which hard drive you want to install Grub.
  boot.loader.grub.device = "/dev/vda"; # or "nodev" for efi only

  # networking.hostName = "nixos"; # Define your hostname.
  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.

  # The global useDHCP flag is deprecated, therefore explicitly set to false here.
  # Per-interface useDHCP will be mandatory in the future, so this generated config
  # replicates the default behaviour.
  networking.useDHCP = false;
  networking.interfaces.ens3.useDHCP = true;

  # Configure network proxy if necessary
  # networking.proxy.default = "http://user:password@proxy:port/";
  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";

  # Select internationalisation properties.
  # i18n = {
  #   consoleFont = "Lat2-Terminus16";
  #   consoleKeyMap = "us";
  #   defaultLocale = "en_US.UTF-8";
  # };

  # Set your time zone.
  # time.timeZone = "Europe/Amsterdam";

  # List packages installed in system profile. To search, run:
  # $ nix search wget
  environment.systemPackages = with pkgs; [ vim ];

  # Some programs need SUID wrappers, can be configured further or are
  # started in user sessions.
  # programs.mtr.enable = true;
  # programs.gnupg.agent = { enable = true; enableSSHSupport = true; };

  # List services that you want to enable:

  # Enable the OpenSSH daemon.
  services.openssh.enable = true;
  services.openssh.permitRootLogin = "no";

  # Open ports in the firewall.
  # networking.firewall.allowedTCPPorts = [ ... ];
  # networking.firewall.allowedUDPPorts = [ ... ];
  # Or disable the firewall altogether.
  # networking.firewall.enable = false;

  # Enable CUPS to print documents.
  # services.printing.enable = true;

  # Enable sound.
  # sound.enable = true;
  # hardware.pulseaudio.enable = true;

  # Enable the X11 windowing system.
  # services.xserver.enable = true;
  # services.xserver.layout = "us";
  # services.xserver.xkbOptions = "eurosign:e";

  # Enable touchpad support.
  # services.xserver.libinput.enable = true;

  # Enable the KDE Desktop Environment.
  # services.xserver.displayManager.sddm.enable = true;
  # services.xserver.desktopManager.plasma5.enable = true;

  # Define a user account. Don't forget to set a password with ‘passwd’.
  # users.users.jane = {
  #   isNormalUser = true;
  #   extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
  # };

  users.extraUsers.andreh = {
    uid = 1000;
    isNormalUser = true;
    extraGroups = [ "wheel" ];
    password =
      "...tmp password..."; # stored in secrets/base-image-old-password.txt
    openssh.authorizedKeys.keys = [
      "ssh-rsa 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 eu@euandre.org"
    ];
  };

  # This value determines the NixOS release with which your system is to be
  # compatible, in order to avoid breaking some software such as database
  # servers. You should change this only after NixOS release notes say you
  # should.
  system.stateVersion = "19.09"; # Did you read the comment?

}