1 files changed, 0 insertions, 107 deletions
diff --git a/base-image/e1d5f317b0f7a-snapshot-configuration.nix b/base-image/e1d5f317b0f7a-snapshot-configuration.nix
deleted file mode 100644
index b80eab0..0000000
--- a/base-image/e1d5f317b0f7a-snapshot-configuration.nix
+++ /dev/null
@@ -1,107 +0,0 @@
-# Edit this configuration file to define what should be installed on
-# your system.  Help is available in the configuration.nix(5) man page
-# and in the NixOS manual (accessible by running ‘nixos-help’).
-
-{ config, pkgs, ... }:
-
-{
-  imports = [ # Include the results of the hardware scan.
-    ./hardware-configuration.nix
-  ];
-
-  # Use the GRUB 2 boot loader.
-  boot.loader.grub.enable = true;
-  boot.loader.grub.version = 2;
-  # boot.loader.grub.efiSupport = true;
-  # boot.loader.grub.efiInstallAsRemovable = true;
-  # boot.loader.efi.efiSysMountPoint = "/boot/efi";
-  # Define on which hard drive you want to install Grub.
-  boot.loader.grub.device = "/dev/vda"; # or "nodev" for efi only
-
-  # networking.hostName = "nixos"; # Define your hostname.
-  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
-
-  # The global useDHCP flag is deprecated, therefore explicitly set to false here.
-  # Per-interface useDHCP will be mandatory in the future, so this generated config
-  # replicates the default behaviour.
-  networking.useDHCP = false;
-  networking.interfaces.ens3.useDHCP = true;
-
-  # Configure network proxy if necessary
-  # networking.proxy.default = "http://user:password@proxy:port/";
-  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
-
-  # Select internationalisation properties.
-  # i18n = {
-  #   consoleFont = "Lat2-Terminus16";
-  #   consoleKeyMap = "us";
-  #   defaultLocale = "en_US.UTF-8";
-  # };
-
-  # Set your time zone.
-  # time.timeZone = "Europe/Amsterdam";
-
-  # List packages installed in system profile. To search, run:
-  # $ nix search wget
-  environment.systemPackages = with pkgs; [ vim ];
-
-  # Some programs need SUID wrappers, can be configured further or are
-  # started in user sessions.
-  # programs.mtr.enable = true;
-  # programs.gnupg.agent = { enable = true; enableSSHSupport = true; };
-
-  # List services that you want to enable:
-
-  # Enable the OpenSSH daemon.
-  services.openssh.enable = true;
-  services.openssh.permitRootLogin = "no";
-
-  # Open ports in the firewall.
-  # networking.firewall.allowedTCPPorts = [ ... ];
-  # networking.firewall.allowedUDPPorts = [ ... ];
-  # Or disable the firewall altogether.
-  # networking.firewall.enable = false;
-
-  # Enable CUPS to print documents.
-  # services.printing.enable = true;
-
-  # Enable sound.
-  # sound.enable = true;
-  # hardware.pulseaudio.enable = true;
-
-  # Enable the X11 windowing system.
-  # services.xserver.enable = true;
-  # services.xserver.layout = "us";
-  # services.xserver.xkbOptions = "eurosign:e";
-
-  # Enable touchpad support.
-  # services.xserver.libinput.enable = true;
-
-  # Enable the KDE Desktop Environment.
-  # services.xserver.displayManager.sddm.enable = true;
-  # services.xserver.desktopManager.plasma5.enable = true;
-
-  # Define a user account. Don't forget to set a password with ‘passwd’.
-  # users.users.jane = {
-  #   isNormalUser = true;
-  #   extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
-  # };
-
-  users.extraUsers.andreh = {
-    uid = 1000;
-    isNormalUser = true;
-    extraGroups = [ "wheel" ];
-    password =
-      "...tmp password..."; # stored in secrets/base-image-old-password.txt
-    openssh.authorizedKeys.keys = [
-      "ssh-rsa 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 eu@euandre.org"
-    ];
-  };
-
-  # This value determines the NixOS release with which your system is to be
-  # compatible, in order to avoid breaking some software such as database
-  # servers. You should change this only after NixOS release notes say you
-  # should.
-  system.stateVersion = "19.09"; # Did you read the comment?
-
-}