| Commit message (Expand) | Author | Files | Lines |
|---|
| 2012-04-16 | avoid hitting eof in wcstol•••shunget cannot unget eof status, causing wcstol to leave endptr
pointing to the wrong place when scanning, for example, L"0x". cheap
fix is to make the read function provide an infinite stream of bogus
characters rather than eof. really this is something of a design flaw
in how the shgetc system is used for strto* and wcsto*; in the long
term, I believe multi-character unget should be scrapped and replaced
with a function that can subtract from the f->shcnt counter.
| Rich Felker | 1 | -2/+3 |
| 2012-04-16 | use the new integer parser (FILE/shgetc based) for strtol, wcstol, etc. | Rich Felker | 14 | -405/+120 |
| 2012-04-16 | new scanf implementation and corresponding integer parser/converter•••advantages over the old code:
- correct results for floating point (old code was bogus)
- wide/regular scanf separated so scanf does not pull in wide code
- well-defined behavior on integers that overflow dest type
- support for %[a-b] ranges with %[ (impl-defined by widely used)
- no intermediate conversion of fmt string to wide string
- cleaner, easier to share code with strto* functions
- better standards conformance for corner cases
the old code remains in the source tree, as the wide versions of the
scanf-family functions are still using it. it will be removed when no
longer needed.
| Rich Felker | 6 | -30/+450 |
| 2012-04-16 | fix buggy limiter handling in shgetc•••this is needed for upcoming new scanf
| Rich Felker | 1 | -4/+3 |
| 2012-04-16 | wordexp must set the we_offs entries of we_wordv to null pointers | Rich Felker | 1 | -0/+4 |
| 2012-04-16 | fix crash in wordfree if we_offs is not initialized by the caller•••I'm not sure if it's legal for wordexp to modify this field, but this
is the only easy/straightforward fix, and applications should not
care. if it's an issue, i can work out a different (but more complex)
solution later.
| Rich Felker | 1 | -0/+2 |
| 2012-04-16 | fix broken shgetc limiter logic (wasn't working) | Rich Felker | 2 | -2/+5 |
| 2012-04-16 | floatscan: fix incorrect count of leading nonzero digits•••this off-by-one error was causing values with just one digit past the
decimal point to be treated by the integer case. in many cases it
would yield the correct result, but if expressions are evaluated in
excess precision, double rounding may occur.
| Rich Felker | 1 | -1/+1 |
| 2012-04-15 | move F_DUPFD_CLOEXEC out of bits•••fcntl values 1024 and up are universal, arch-independent. later I'll
add some of the other linux-specific ones for notify, leases, pipe
size, etc. here too.
| Rich Felker | 4 | -6/+2 |
| 2012-04-15 | add F_SETSIG and F_GETSIG (linux specific) to fcntl.h•••F_* is in the reserved namespace so no feature test is needed
| Rich Felker | 3 | -0/+6 |
| 2012-04-14 | fix signedness error handling invalid multibyte sequences in regexec•••the "< 0" test was always false due to use of an unsigned type. this
resulted in infinite loops on 32-bit machines (adding -1U to a pointer
is the same as adding -1) and crashes on 64-bit machines (offsetting
the string pointer by 4gb-1b when an illegal sequence was hit).
| Rich Felker | 1 | -2/+2 |
| 2012-04-13 | rename __sa_restorer to sa_restorer in struct sigaction•••this is legal since sa_* is in the reserved namespace for signal.h,
per posix. note that the sa_restorer field is not used anywhere, so
programs that are trying to use it may still break, but at least
they'll compile. if it turns out such programs actually need to be
able to set their own sa_restorer to function properly, i'll add the
necessary code to sigaction.c later.
| Rich Felker | 1 | -1/+1 |
| 2012-04-13 | remove invalid code from TRE•••TRE wants to treat + and ? after a +, ?, or * as special; ? means
ungreedy and + is reserved for future use. however, this is
non-conformant. although redundant, these redundant characters have
well-defined (no-op) meaning for POSIX ERE, and are actually _literal_
characters (which TRE is wrongly ignoring) in POSIX BRE mode.
the simplest fix is to simply remove the unneeded nonstandard
functionality. as a plus, this shaves off a small amount of bloat.
| Rich Felker | 1 | -14/+0 |
| 2012-04-13 | fix broken regerror (typo) and missing message | Rich Felker | 1 | -2/+2 |
| 2012-04-13 | use fast version of the int reading code for the high-order digits too•••this increases code size slightly, but it's considerably faster,
especially for power-of-2 bases.
| Rich Felker | 1 | -3/+13 |
| 2012-04-13 | use macros instead of inline functions in shgetc.h•••at -Os optimization level, gcc refuses to inline these functions even
though the inlined code would roughly the same size as the function
call, and much faster. the easy solution is to make them into macros.
| Rich Felker | 1 | -20/+4 |
| 2012-04-13 | fix spurious overflows in strtoull with small bases•••whenever the base was small enough that more than one digit could
still fit after UINTMAX_MAX/36-1 was reached, only the first would be
allowed; subsequent digits would trigger spurious overflow, making it
impossible to read the largest values in low bases.
| Rich Felker | 1 | -7/+3 |
| 2012-04-12 | remove magic numbers from floatscan | Rich Felker | 1 | -5/+5 |
| 2012-04-12 | optimize more integer cases in floatscan; comment the whole procedure | Rich Felker | 1 | -8/+27 |
| 2012-04-11 | revert invalid optimization in floatscan | Rich Felker | 1 | -2/+2 |
| 2012-04-11 | fix stupid typo in floatscan that caused excess rounding of some values | Rich Felker | 1 | -1/+1 |
| 2012-04-11 | add some more useful suggested options to config.mak template | Rich Felker | 1 | -0/+6 |
| 2012-04-11 | optimize floatscan downscaler to skip results that won't be needed•••when upscaling, even the very last digit is needed in cases where the
input is exact; no digits can be discarded. but when downscaling, any
digits less significant than the mantissa bits are destined for the
great bitbucket; the only influence they can have is their presence
(being nonzero). thus, we simply throw them away early. the result is
nearly a 4x performance improvement for processing huge values.
the particular threshold LD_B1B_DIG+3 is not chosen sharply; it's
simply a "safe" distance past the significant bits. it would be nice
to replace it with a sharp bound, but i suspect performance will be
comparable (within a few percent) anyway.
| Rich Felker | 1 | -2/+3 |
| 2012-04-11 | simplify/debloat radix point alignment code in floatscan•••now that this is the first operation, it can rely on the circular
buffer contents not being wrapped when it begins. we limit the number
of digits read slightly in the initial parsing loops too so that this
code does not have to consider the case where it might cause the
circular buffer to wrap; this is perfectly fine because KMAX is chosen
as a power of two for circular-buffer purposes and is much larger than
it otherwise needs to be, anyway.
these changes should not affect performance at all.
| Rich Felker | 1 | -9/+4 |
| 2012-04-11 | optimize floatscan: avoid excessive upscaling•••upscaling by even one step too much creates 3-29 extra iterations for
the next loop. this is still suboptimal since it always goes by 2^29
rather than using a smaller upscale factor when nearing the target,
but performance on common, small-magnitude, few-digit values has
already more than doubled with this change.
more optimizations on the way...
| Rich Felker | 1 | -27/+27 |
| 2012-04-11 | fix incorrect initial count in shgetc when data is already buffered | Rich Felker | 1 | -1/+1 |
| 2012-04-11 | fix bug parsing lone zero followed by junk, and hex float over-reading | Rich Felker | 1 | -6/+5 |
| 2012-04-10 | fix float scanning of certain values ending in zeros•••for example, "1000000000" was being read as "1" due to this loop
exiting early. it's necessary to actually update z and zero the
entries so that the subsequent rounding code does not get confused;
before i did that, spurious inexact exceptions were being raised.
| Rich Felker | 1 | -1/+3 |
| 2012-04-10 | fix potential overflow in exponent reading•••note that there's no need for a precise cutoff, because exponents this
large will always result in overflow or underflow (it's impossible to
read enough digits to compensate for the exponent magnitude; even at a
few nanoseconds per digit it would take hundreds of years).
| Rich Felker | 1 | -1/+1 |
| 2012-04-10 | set errno properly when parsing floating point | Rich Felker | 1 | -4/+21 |
| 2012-04-10 | add "scan helper getc" and rework strtod, etc. to use it•••the immediate benefit is a significant debloating of the float parsing
code by moving the responsibility for keeping track of the number of
characters read to a different module.
by linking shgetc with the stdio buffer logic, counting logic is
defered to buffer refill time, keeping the calls to shgetc fast and
light.
in the future, shgetc will also be useful for integrating the new
float code with scanf, which needs to not only count the characters
consumed, but also limit the number of characters read based on field
width specifiers.
shgetc may also become a useful tool for simplifying the integer
parsing code.
| Rich Felker | 6 | -75/+115 |
| 2012-04-10 | unify strtof/strtod/strtold wrappers and fix initial whitespace issue | Rich Felker | 3 | -34/+21 |
| 2012-04-10 | new floating point parser/converter•••this version is intended to be fully conformant to the ISO C, POSIX,
and IEEE standards for conversion of decimal/hex floating point
strings to float, double, and long double (ld64 or ld80 only at
present) values. in particular, all results are intended to be rounded
correctly according to the current rounding mode. further, this
implementation aims to set the floating point underflow, overflow, and
inexact flags to reflect the conversion performed.
a moderate amount of testing has been performed (by nsz and myself)
prior to integration of the code in musl, but it still may have bugs.
so far, only strto(d|ld|f) use the new code. scanf integration will be
done as a separate commit, and i will add implementations of the wide
character functions later.
| Rich Felker | 5 | -94/+477 |
| 2012-04-09 | fix alloca issue in stdlib.h too•••I forgot _GNU_SOURCE also has it declared here...
| Rich Felker | 1 | -1/+1 |
| 2012-04-09 | alloca cannot be a function. #define it to the gcc builtin if possible•••gcc makes this mapping by default anyway, but it will be disabled by
-fno-builtin (and presumably by -std=c99 or similar). for the main
program the error will be reported by the linker, and the issue can
easily be fixed, but for dynamic-loaded so files, the error cannot be
detected until dlopen time, at which point it has become very obscure.
| Rich Felker | 1 | -0/+4 |
| 2012-04-04 | math: fix x86 asin accuracy•••use (1-x)*(1+x) instead of (1-x*x) in asin.s
the later can be inaccurate with upward rounding when x is close to 1
| nsz | 2 | -5/+6 |
| 2012-04-04 | work around nasty gcc bug in the i386 syscall asm•••when the "r" (register) constraint is used to let gcc choose a
register, gcc will sometimes assign the same register that was used
for one of the other fixed-register operands, if it knows the values
are the same. one common case is multiple zero arguments to a syscall.
this horribly breaks the intended usage, which is swapping the GOT
pointer from ebx into the temp register and back to perform the
syscall.
presumably there is a way to fix this with advanced usage of register
constaints on the inline asm, but having bad memories about hellish
compatibility issues with different gcc versions, for the time being
i'm just going to hard-code specific registers to be used. this may
hurt the compiler's ability to optimize, but it will fix serious
miscompilation issues.
so far the only function i know what compiled incorrectly is
getrlimit.c, and naturally the bug only applies to shared (PIC)
builds, but it may be more extensive and may have gone undetected..
| Rich Felker | 1 | -4/+4 |
| 2012-04-03 | remove useless (at best, harmful) feature test checks in aio.h | Rich Felker | 1 | -5/+0 |
| 2012-04-01 | improve name lookup performance in corner cases•••the buffer in getaddrinfo really only matters when /etc/hosts is huge,
but in that case, the huge number of syscalls resulting from a tiny
buffer would seriously impact the performance of every name lookup.
the buffer in __dns.c has also been enlarged a bit so that typical
resolv.conf files will fit fully in the buffer. there's no need to
make it so large as to dominate the syscall overhead for large files,
because resolv.conf should never be large.
| Rich Felker | 2 | -2/+2 |
| 2012-03-30 | optimize signbit macro | Rich Felker | 1 | -2/+2 |
| 2012-03-30 | make math.h more c++-friendly | Rich Felker | 1 | -2/+5 |
| 2012-03-29 | math: minor cleanups in ceil and floor | nsz | 5 | -10/+7 |
| 2012-03-29 | math: remove x86 modf asm•••the int part was wrong when -1 < x <= -0 (+0.0 instead of -0.0)
and the size and performace gain of the asm version was negligible
| nsz | 4 | -111/+0 |
| 2012-03-29 | math: rewrite modf.c and clean up modff.c•••cleaner implementation with unions and unsigned arithmetic
| nsz | 2 | -72/+45 |
| 2012-03-28 | math: fix modfl.c bug•••modfl(+-inf) was wrong on ld80 because the explicit msb
was not taken into account during inf vs nan check
| nsz | 1 | -1/+1 |
| 2012-03-27 | math: fix a regression in powl and do some cleanups•••previously a division was accidentally turned into integer div
(w = -i/NXT;) instead of long double div (w = -i; w /= NXT;)
| nsz | 1 | -12/+11 |
| 2012-03-27 | math: add dummy tgamma and tgammaf implementations | nsz | 2 | -0/+32 |
| 2012-03-27 | math: remove comment about aliasing lgamma as gamma•••It is probably not worth supporting gamma.
(it was already deprecated in 4.3BSD)
| nsz | 3 | -8/+4 |
| 2012-03-27 | math: fix typo in i386 remquof and remquol asm•••(fldl instruction was used instead of flds and fldt)
| nsz | 1 | -5/+5 |
| 2012-03-25 | add strfmon_l variant (still mostly incomplete) | Rich Felker | 1 | -3/+27 |
