| Commit message (Expand) | Author | Files | Lines |
|---|
| 2016-01-31 | better a_sc inline asm constraint on aarch64 and arm•••"Q" input constraint was used for the written object, instead of "=Q"
output constraint. this should not cause problems because "memory"
is on the clobber list, but "=Q" better documents the intent and more
consistent with the actual asm code.
this changes the generated code, because different registers are used,
but other than the register names nothing should change.
| Szabolcs Nagy | 2 | -3/+3 |
| 2016-01-31 | don't suppress shared libc when linker lacks -Bsymbolic-functions•••previous work overhauling the dynamic linker made it so that linking
libc with -Bsymbolic-functions was no longer mandatory, but the
configure logic that forced --disable-shared when ld failed to accept
the option was left in place.
this commit removes the hard-coded -Bsymbolic-functions from the
Makefile and changes the configure test to one that simply adds it to
the auto-detected LDFLAGS on success.
| Rich Felker | 2 | -11/+5 |
| 2016-01-30 | ldso: fix GDB dynamic linker info on MIPS•••GDB is looking for a pointer to the ldso debug info in the data of the
..rld_map section.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
| Felix Fietkau | 3 | -5/+12 |
| 2016-01-30 | regex: simplify the {,} repetition parsing logic | Szabolcs Nagy | 1 | -20/+19 |
| 2016-01-30 | regex: treat \+, \? as repetitions in BRE•••These are undefined escape sequences by the standard, but often
used in sed scripts.
| Szabolcs Nagy | 1 | -1/+5 |
| 2016-01-30 | regex: rewrite the repetition parsing code•••The goto logic was hard to follow and modify. This is
in preparation for the BRE \+ and \? support.
| Szabolcs Nagy | 1 | -30/+29 |
| 2016-01-30 | regex: treat \| in BRE as alternation•••The standard does not define semantics for \| in BRE, but some code
depends on it meaning alternation. Empty alternative expression is
allowed to be consistent with ERE.
Based on a patch by Rob Landley.
| Szabolcs Nagy | 1 | -2/+17 |
| 2016-01-30 | regex: reject repetitions in some cases with REG_BADRPT•••Previously repetitions were accepted after empty expressions like
in (*|?)|{2}, but in BRE the handling of * and \{\} were not
consistent: they were accepted as literals in some cases and
repetitions in others.
It is better to treat repetitions after an empty expression as an
error (this is allowed by the standard, and glibc mostly does the
same). This is hard to do consistently with the current logic so
the new rule is:
Reject repetitions after empty expressions, except after assertions
^*, $? and empty groups ()+ and never treat them as literals.
Empty alternation (|a) is undefined by the standard, but it can be
useful so that should be accepted.
| Szabolcs Nagy | 1 | -3/+12 |
| 2016-01-30 | regex: clean up position accounting for literal nodes•••This should not change the meaning of the code, just make the intent
clearer: advancing position is tied to adding a new literal.
| Szabolcs Nagy | 1 | -4/+2 |
| 2016-01-30 | fix misaligned pointer-like objects in arm atomics asm source file•••this file's .data section was not aligned, and just happened to get
the correct alignment with past builds. it's likely that the move of
atomic.s from arch/arm/src to src/thread/arm caused the change in
alignment, which broke the atomic and thread-pointer access fragments
on actual armv5 hardware.
| Rich Felker | 1 | -0/+2 |
| 2016-01-30 | fix regression in dynamic-linked tls when both main app & libs have tls•••commit d56460c939c94a6c547abe8238f442b8de10bfbd introduced this bug by
setting up the tls module chain incorrectly when the main app has tls.
the singly-linked list head pointer was setup correctly, but the tail
pointer was not, so the first attempt to append to the list (for a
shared library with tls) would treat the list as empty and effectively
removed the main app from the list. this left all tls module id
numbers off-by-one.
this bug did not appear in any released versions.
| Rich Felker | 1 | -1/+1 |
| 2016-01-28 | reuse parsed resolv.conf in dns core to avoid re-reading/re-parsing | Rich Felker | 2 | -16/+22 |
| 2016-01-28 | fix uninitialized variable in new resolv.conf parser | Rich Felker | 1 | -1/+1 |
| 2016-01-28 | add support for search domains to dns resolver•••search is only performed if the search or domain keyword is used in
resolv.conf and the queried name has fewer than ndots dots. there is
no default domain and names with >=ndots dots are never subjected to
search; failure in the root scope is final.
the (non-POSIX) res_search API presently does not honor search. this
may be added at some point in the future if needed.
resolv.conf is now parsed twice, at two different layers of the code
involved. this will be fixed in a subsequent patch.
| Rich Felker | 1 | -1/+41 |
| 2016-01-28 | fix handling of dns response codes•••rcode of 3 (NxDomain) was treated as a hard EAI_NONAME failure, but it
should instead return 0 (no results) so the caller can continue
searching. this will be important for adding search domain support.
the top-level caller will automatically return EAI_NONAME if there are
zero results at the end.
also, the case where rcode is 0 (success) but there are no results was
not handled. this happens when the domain exists but there are no A or
AAAA records for it. in this case a hard EAI_NONAME should be imposed
to inhibit further search, since the name was defined and just does
not have any address associated with it. previously a misleading hard
failure of EAI_FAIL was reported.
| Rich Felker | 1 | -1/+2 |
| 2016-01-28 | fix logic for matching search/domain keywords in resolv.conf | Rich Felker | 1 | -1/+1 |
| 2016-01-28 | factor resolv.conf parsing out of res_msend to its own file•••this change is made in preparation for adding search domains, for
which higher-level code will need to parse resolv.conf. simply parsing
it twice for each lookup would be one reasonable option, but the
existing parser code was buggy anyway, which suggested to me that it's
a bad idea to have two variants of this code in two different places.
the old code in res_msend potentially misinterpreted overly long lines
in resolv.conf, and stopped parsing after it found 3 nameservers, even
if there were relevant options left to be parsed later in the file.
| Rich Felker | 3 | -59/+125 |
| 2016-01-28 | add errno setting to stub utmpxname function | Rich Felker | 1 | -0/+2 |
| 2016-01-28 | legacy/utmpx: Add utmp{,x}name stubs | Kylie McClain | 1 | -0/+7 |
| 2016-01-27 | deduplicate the bulk of the arch bits headers•••all bits headers that were identical for a number of 'clean' archs are
moved to the new arch/generic tree. in addition, a few headers that
differed only cosmetically from the new generic version are removed.
additional deduplication may be possible in mman.h and in several
headers (limits.h, posix.h, stdint.h) that mostly depend on whether
the arch is 32- or 64-bit, but they are left alone for now because
greater gains are likely possible with more invasive changes to header
logic, which is beyond the scope of this commit.
| Rich Felker | 92 | -3194/+0 |
| 2016-01-27 | add arch/generic include fallback to build rules•••this sets the stage for the first phase of the bits deduplication.
bits headers which are identical for "most" archs will be moved to
arch/generic/bits.
| Rich Felker | 2 | -4/+9 |
| 2016-01-27 | remove unneeded -I options from configure test for may_alias attribute•••this test does not include anything, so the -I options are not useful
and are just a maintenance burden if paths change.
| Rich Felker | 1 | -1/+1 |
| 2016-01-27 | mips: add vdso support•••vdso support is available on mips starting with kernel 4.4, see kernel
commit a7f4df4e21 "MIPS: VDSO: Add implementations of gettimeofday()
and clock_gettime()" for details.
In Linux kernel 4.4.0 the mips code returns -ENOSYS in case it can not
handle the vdso call and assumes the libc will call the original
syscall in this case. Handle this case in musl. Currently Linux kernel
4.4.0 handles the following types: CLOCK_REALTIME_COARSE,
CLOCK_MONOTONIC_COARSE, CLOCK_REALTIME and CLOCK_MONOTONIC.
| Hauke Mehrtens | 1 | -0/+4 |
| 2016-01-27 | improve clock_gettime and adapt it to support slightly-broken vdso•••these changes are motivated by a functionally similar patch by Hauke
Mehrtens to address the needs of the new mips vdso clock_gettime,
which wrongly fails with ENOSYS rather than falling back to making a
syscall for clock ids it cannot handle from userspace. in the process
of preparing to handle that case, it was noticed that the old
clock_gettime use of the vdso was actually wrong with respect to error
handling -- the tail call to the vdso function failed to set errno and
instead returned an error code.
since tail calls to vdso are no longer possible and since the plain
syscall code is now needed as a fallback path anyway, it does not make
sense to use a function pointer to call the plain syscall code path.
instead, it's inlined at the end of the main clock_gettime function.
the new code also avoids the need to test for initialization of the
vdso function pointer by statically initializing it to a self-init
function, and eliminates redundant loads from the volatile pointer
object.
finally, the use of a_cas_p on an object of type other than void *,
which is not permitted aliasing, is replaced by using an object with
the correct type and casting the value.
| Rich Felker | 1 | -22/+39 |
| 2016-01-26 | fix siginfo_t for mips•••si_errno and si_code are swapped in mips siginfo_t compared to other
archs and some si_code values are different. This fix is required
for POSIX timers to work.
based on patch by Dmitry Ivanov.
| Szabolcs Nagy | 2 | -0/+13 |
| 2016-01-26 | move bits/signal.h include close to the top of signal.h•••only have code above the bits/signal.h include that is necessary.
(some types are used for the ucontext struct and mips has to
override a few macro definitions)
this way mips bits/signal.h will be able to affect siginfo_t.
| Szabolcs Nagy | 1 | -6/+12 |
| 2016-01-26 | add new PTRACE_SECCOMP_GET_FILTER ptrace command•••allows the tracer to dump the bpf seccomp filters of the tracee,
new in linux v4.4, commit f8e529ed941ba2bbcbf310b575d968159ce7e895
| Szabolcs Nagy | 1 | -0/+1 |
| 2016-01-26 | add MCL_ONFAULT and MLOCK_ONFAULT mlockall and mlock2 flags•••they lock faulted pages into memory (useful when a small part of a
large mapped file needs efficient access), new in linux v4.4, commit
b0f205c2a3082dd9081f9a94e50658c5fa906ff1
MLOCK_* is not in the POSIX reserved namespace for sys/mman.h
| Szabolcs Nagy | 11 | -0/+11 |
| 2016-01-26 | add mlock2 syscall number from linux v4.4•••this is mlock with a flags argument, new in linux commit
a8ca5d0ecbdde5cc3d7accacbd69968b0c98764e
as usual microblaze and sh don't have allocated syscall number yet.
| Szabolcs Nagy | 8 | -0/+16 |
| 2016-01-26 | add new PTRACE_O_SUSPEND_SECCOMP ptrace option•••allows a ptracer process to disable/enable seccomp filters of the
traced process, useful for checkpoint/restore, new in v4.3 commit
13c4a90119d28cfcb6b5bdd820c233b86c2b0237
| Szabolcs Nagy | 1 | -1/+2 |
| 2016-01-26 | add new PR_CAP_AMBIENT and related defines to sys/prctl.h•••ambient capability mask is new in linux v4.3, commit
58319057b7847667f0c9585b9de0e8932b0fdb08
| Szabolcs Nagy | 1 | -0/+6 |
| 2016-01-26 | update netpacket/packet.h to linux v4.3 | Szabolcs Nagy | 1 | -0/+17 |
| 2016-01-26 | add new membarrier, userfaultfd and switch_endian syscalls•••new in linux v4.3 added for aarch64, arm, i386, mips, or1k, powerpc,
x32 and x86_64.
membarrier is a system wide memory barrier, moves most of the
synchronization cost to one side, new in kernel commit
5b25b13ab08f616efd566347d809b4ece54570d1
userfaultfd is useful for qemu and is new in kernel commit
8d2afd96c20316d112e04d935d9e09150e988397
switch_endian is powerpc only for switching endianness, new in commit
529d235a0e190ded1d21ccc80a73e625ebcad09b
| Szabolcs Nagy | 8 | -0/+34 |
| 2016-01-26 | add new i386 socket syscall numbers•••new in linux v4.3 commit 9dea5dc921b5f4045a18c63eb92e84dc274d17eb
direct calls instead of socketcall allow better seccomp filtering.
musl continues to use socketcalls internally on i386. (older kernels
would need a fallback mechanism if the direct calls were used.)
| Szabolcs Nagy | 1 | -0/+30 |
| 2016-01-26 | change the internal socketcall selection logic•••only use SYS_socketcall if SYSCALL_USE_SOCKETCALL is defined
internally, otherwise use direct syscalls.
this commit does not change the current behaviour, it is
preparation for adding direct syscall numbers for i386.
| Szabolcs Nagy | 2 | -1/+3 |
| 2016-01-25 | add ssp suppression to some arch-override files that may need it•••these were not covered by the parent-level rules with the new build
system. in the old build system, the equivalent files were often in
arch/$(ARCH)/src and likewise lacked the suppression. this could lead
to early crashing (before thread pointer init) when libc itself was
built with stack protector enabled.
| Rich Felker | 1 | -2/+4 |
| 2016-01-25 | use same object files for libc.a and libc.so if compiler produces PIC•••now that .lo and .o files differ only by whether -fPIC is passed (and
no longer at the source level based on the SHARED macro), it's
possible to use the same object files for both static and shared libc
when the compiler would produce PIC for the static files anyway. this
happens if the user has included -fPIC in their CFLAGS or if the
compiler has been configured to produce PIE by default.
we use the .lo files for both, and still append -fPIC to the CFLAGS,
rather than using the .o files so that libc.so does not break
catastrophically if the user later removes -fPIC from CFLAGS in
config.mak or on the make command line. this also ensures that we get
full -fPIC in case -fpic, -fPIE, or some other lesser-PIC option was
passed in CFLAGS.
| Rich Felker | 2 | -2/+13 |
| 2016-01-25 | move dynamic linker to its own top-level directory, ldso•••this eliminates the last need for the SHARED macro to control how
files in the src tree are compiled. the same code is used for both
libc.a and libc.so, with additional code for the dynamic linker (from
the new ldso tree) being added to libc.so but not libc.a. separate .o
and .lo object files still exist for the src tree, but the only
difference is that the .lo files are built as PIC.
in the future, if/when we add dlopen support for static-linked
programs, much of the code in dynlink.c may be moved back into the src
tree, but properly factored into separate source files. in that case,
the code in the ldso tree will be reduced to just the dynamic linker
entry point, self-relocation, and loading of libraries needed by the
main application.
| Rich Felker | 5 | -19/+11 |
| 2016-01-25 | adapt static dl_iterate_phdr not to depend on !defined(SHARED)•••like elsewhere, use a weak alias that the dynamic linker will override
with a more complete version capable of handling shared libraries.
| Rich Felker | 1 | -4/+3 |
| 2016-01-25 | move static-linked stub dlsym out of dynlink.c•••the function name is still __-prefixed because it requires an asm
wrapper to pass the caller's address in order for RTLD_NEXT to work.
since this was the last function in dynlink.c still used for static
linking, now the whole file is conditional on SHARED being defined.
| Rich Felker | 2 | -11/+15 |
| 2016-01-25 | move static-linked stub dlopen out of dynlink.c | Rich Felker | 2 | -5/+13 |
| 2016-01-25 | move dlinfo out of dynlink.c | Rich Felker | 2 | -16/+12 |
| 2016-01-25 | move dlclose out of dynlink.c to its own source file | Rich Felker | 2 | -5/+9 |
| 2016-01-25 | move static-linked stub invalid dso handle checking out of dynlink.c | Rich Felker | 2 | -9/+20 |
| 2016-01-25 | move static/stub version of dladdr out of dynlink.c | Rich Felker | 2 | -9/+6 |
| 2016-01-25 | factor dlerror and error-setting code out of dynlink.c•••the ultimate goal of this change is to get all code used in libc.a out
of dynlink.c, so that the dynamic linker code can be moved to its own
tree and object files in the src tree can all be shared between libc.a
and libc.so.
| Rich Felker | 2 | -32/+55 |
| 2016-01-25 | fix arm a_crash for big endian•••contrary to commit 89e149d275a7699a4a5e4c98bab267648f64cbba, big
endian arm does need the instruction bytes in big endian order. rather
than trying to use a special encoding that works as arm or thumb,
simply encode the simplest/canonical undefined instructions dependent
on whether __thumb__ is defined.
| Rich Felker | 1 | -2/+4 |
| 2016-01-25 | add native a_crash primitive for arm•••the .byte directive encodes a guaranteed-undefined instruction, the
same one Linux fills the kuser helper page with when it's disabled.
the udf mnemonic and and .insn directives are not supported by old
binutils versions, and larger-than-byte integer directives would
produce the wrong output on big-endian.
| Rich Felker | 1 | -0/+10 |
| 2016-01-24 | add new IP_BIND_ADDRESS_NO_PORT and IPPROTO_MPLS to netinet/in.h•••IP_BIND_ADDRESS_NO_PORT is a SOL_IP socket option to delay src port
allocation until connect in case src ip is set with bind(port=0).
new in linux v4.2, commit 90c337da1524863838658078ec34241f45d8394d
IPPROTO_MPLS protocol number for mpls over ip.
new in linux v4.2, commit 730fc4371333636a00fed32c587fc1e85c5367e2
| Szabolcs Nagy | 1 | -0/+2 |
| 2016-01-24 | update netinet/tcp.h for linux v4.2•••TCP_CC_INFO is a new socket option to get congestion control info without
netlink (union tcp_cc_info is in linux/inet_diag.h kernel header).
linux commit 6e9250f59ef9efb932c84850cd221f22c2a03c4a
TCP_SAVE_SYN, TCP_SAVED_SYN socket options are for saving and getting the
SYN headers of passive connections in a server application.
linux commit cd8ae85299d54155702a56811b2e035e63064d3d
Add new tcpi_* fields to struct tcp_info implementing RFC4898 counters.
linux commit 2efd055c53c06b7e89c167c98069bab9afce7e59
| Szabolcs Nagy | 1 | -0/+7 |
