From cfd0246b241cb6e58153e68f7e30ed56b9bf054b Mon Sep 17 00:00:00 2001
From: EuAndreh <eu@euandre.org>
Date: Sun, 17 Nov 2024 20:15:02 -0300
Subject: Remove jekyll infrastructure setup
---
...-send-email-to-multiple-recipients-with-curl.po | 249 ---------------------
1 file changed, 249 deletions(-)
delete mode 100644 po/eo/LC_MESSAGES/_tils/2021-01-12-awk-snippet-send-email-to-multiple-recipients-with-curl.po
(limited to 'po/eo/LC_MESSAGES/_tils/2021-01-12-awk-snippet-send-email-to-multiple-recipients-with-curl.po')
diff --git a/po/eo/LC_MESSAGES/_tils/2021-01-12-awk-snippet-send-email-to-multiple-recipients-with-curl.po b/po/eo/LC_MESSAGES/_tils/2021-01-12-awk-snippet-send-email-to-multiple-recipients-with-curl.po
deleted file mode 100644
index 5ed4783..0000000
--- a/po/eo/LC_MESSAGES/_tils/2021-01-12-awk-snippet-send-email-to-multiple-recipients-with-curl.po
+++ /dev/null
@@ -1,249 +0,0 @@
-#
-msgid ""
-msgstr ""
-
-msgid "title: 'Awk snippet: send email to multiple recipients with cURL'"
-msgstr ""
-
-msgid "date: 2021-01-12"
-msgstr ""
-
-msgid "layout: post"
-msgstr ""
-
-msgid "lang: en"
-msgstr ""
-
-msgid "ref: awk-snippet-send-email-to-multiple-recipients-with-curl"
-msgstr ""
-
-msgid "My requirements for the `sendmail` command were:"
-msgstr ""
-
-msgid "store the email in a file, and send it later."
-msgstr ""
-
-msgid "send from different addresses, using different SMTP servers;"
-msgstr ""
-
-msgid ""
-"I couldn't find an MTA that could accomplish that, but I was able to quickly"
-" write a solution."
-msgstr ""
-
-msgid "The first part was the easiest: store the email in a file:"
-msgstr ""
-
-msgid ""
-"# ~/.config/mutt/muttrc:\n"
-"set sendmail=~/bin/enqueue-email.sh\n"
-"\n"
-"# ~/bin/enqueue-email.sh:\n"
-"#!/bin/sh -eu\n"
-"\n"
-"cat - > \"$HOME/mbsync/my-queued-emails/$(date -Is)\"\n"
-msgstr ""
-
-msgid ""
-"Now that I had the email file store locally, I needed a program to send the "
-"email from the file, so that I could create a cronjob like:"
-msgstr ""
-
-msgid ""
-"for f in ~/mbsync/my-queued-emails/*; do\n"
-" ~/bin/dispatch-email.sh \"$f\" && rm \"$f\"\n"
-"done\n"
-msgstr ""
-
-msgid ""
-"The `dispatch-email.sh` would have to look at the `From: ` header and decide"
-" which SMTP server to use. As I [found "
-"out](https://blog.edmdesigner.com/send-email-from-linux-command-line/) that "
-"[curl](https://curl.se/) supports SMTP and is able to send emails, this is "
-"what I ended up with:"
-msgstr ""
-
-msgid "Most of curl flags used are self-explanatory, except for `$rcpt`."
-msgstr ""
-
-msgid ""
-"curl connects to the SMTP server, but doesn't set the recipient address by "
-"looking at the message. My solution was to generate the curl flags, store "
-"them in `$rcpt` and use it unquoted to leverage shell word splitting."
-msgstr ""
-
-msgid ""
-"To me, the most interesting part was building the `$rcpt` flags. My first "
-"instinct was to try grep, but it couldn't print only matches in a regex. As "
-"I started to turn towards sed, I envisioned needing something else to loop "
-"over the sed output, and I then moved to Awk."
-msgstr ""
-
-msgid ""
-"$ H='To: to@example.com, to2@example.com\\nCc: cc@example.com, cc2@example.com\\nBcc: bcc@example.com,bcc2@example.com\\n'\n"
-"$ printf \"$H\" | awk '/^To: .*$/ { print $0 }'\n"
-"To: to@example.com, to2@example.com\n"
-"$ printf \"$H\" | awk 'match($0, /^To: (.*)$/, m) { print m }'\n"
-"awk: ligne de commande:1: (FILENAME=- FNR=1) fatal : tentative d'utilisation du tableau « m » dans un contexte scalaire\n"
-"$ printf \"$H\" | awk 'match($0, /^To: (.*)$/, m) { print m[0] }'\n"
-"To: to@example.com, to2@example.com\n"
-"$ printf \"$H\" | awk 'match($0, /^To: (.*)$/, m) { print m[1] }'\n"
-"to@example.com, to2@example.com\n"
-"$ printf \"$H\" | awk 'match($0, /^To: (.*)$/, m) { split(m[1], tos, \" \"); print tos }'\n"
-"awk: ligne de commande:1: (FILENAME=- FNR=1) fatal : tentative d'utilisation du tableau « tos » dans un contexte scalaire\n"
-"$ printf \"$H\" | awk 'match($0, /^To: (.*)$/, m) { split(m[1], tos, \" \"); print tos[0] }'\n"
-"\n"
-"$ printf \"$H\" | awk 'match($0, /^To: (.*)$/, m) { split(m[1], tos, \" \"); print tos[1] }'\n"
-"to@example.com,\n"
-"$ printf \"$H\" | awk 'match($0, /^To: (.*)$/, m) { split(m[1], tos, \" \"); print tos[2] }'\n"
-"to2@example.com\n"
-"$ printf \"$H\" | awk 'match($0, /^To: (.*)$/, m) { split(m[1], tos, \" \"); print tos[3] }'\n"
-"\n"
-msgstr ""
-
-msgid ""
-"(This isn't the verbatim interactive session, but a cleaned version to make "
-"it more readable.)"
-msgstr ""
-
-msgid ""
-"At this point, I realized I needed a for loop over the `tos` array, and I "
-"moved the Awk snippet into the `~/bin/dispatch-email.sh`. I liked the final "
-"thing:"
-msgstr ""
-
-msgid ""
-"match($0, /^(To|Cc|Bcc): (.*)$/, m) {\n"
-" split(m[2], tos, \",\")\n"
-" for (i in tos) {\n"
-" print \"--mail-rcpt \" tos[i]\n"
-" }\n"
-"}\n"
-msgstr ""
-
-msgid ""
-"As I learn more about Awk, I feel that it is too undervalued, as many people"
-" turn to Perl or other programming languages when Awk suffices. The "
-"advantage is pretty clear: writing programs that run on any POSIX system, "
-"without extra dependencies required."
-msgstr ""
-
-msgid "Coding to the standards is underrated."
-msgstr ""
-
-msgid ""
-"#!/bin/sh -eu\n"
-"\n"
-"F=\"$1\"\n"
-"\n"
-"rcpt=\"$(awk '\n"
-" match($0, /^(To|Cc|Bcc): (.*)$/, m) {\n"
-" split(m[2], tos, \",\")\n"
-" for (i in tos) {\n"
-" print \"--mail-rcpt \" tos[i]\n"
-" }\n"
-" }\n"
-"' \"$F\")\"\n"
-"\n"
-"if grep -qE '^From: .*<addr@server1\\.org>$' \"$F\"; then\n"
-" curl \\\n"
-" -s \\\n"
-" --url smtp://smtp.server1.org:587 \\\n"
-" --ssl-reqd \\\n"
-" --mail-from addr@server1.org \\\n"
-" $rcpt \\\n"
-" --user 'addr@server1.org:my-long-and-secure-passphrase' \\\n"
-" --upload-file \"$F\"\n"
-"elif grep -qE '^From: .*<addr@server2\\.org>$' \"$F\"; then\n"
-" curl \\\n"
-" -s \\\n"
-" --url smtp://smtp.server2.org:587 \\\n"
-" --ssl-reqd \\\n"
-" --mail-from addr@server2.org \\\n"
-" $rcpt \\\n"
-" --user 'addr@server2.org:my-long-and-secure-passphrase' \\\n"
-" --upload-file \"$F\"\n"
-"else\n"
-" echo 'Bad \"From: \" address'\n"
-" exit 1\n"
-"fi\n"
-msgstr ""
-
-msgid ""
-"In the short Awk snippet, 3 things were new to me: the `match(...)`, "
-"`split(...)` and `for () {}`. The only other function I have ever used was "
-"`gsub(...)`, but these new ones felt similar enough that I could almost "
-"guess their behaviour and arguments. `match(...)` stores the matches of a "
-"regex on the given array positionally, and `split(...)` stores the chunks in"
-" the given array."
-msgstr ""
-
-msgid "I even did it incrementally:"
-msgstr ""
-
-msgid ""
-"As I experiment with [Neomutt](https://neomutt.org/), I wanted to keep being"
-" able to enqueue emails for sending later like my previous setup, so that I "
-"didn't rely on having an internet connection."
-msgstr ""
-
-#~ msgid ""
-#~ "As I experimented with [Neomutt](https://neomutt.org/), I wanted to keep "
-#~ "being able to enqueue emails for sending later like my previous setup, so "
-#~ "that I didn't rely on having an internet connection."
-#~ msgstr ""
-
-#~ msgid "I even did this incrementally:"
-#~ msgstr ""
-
-#~ msgid ""
-#~ "In the short Awk snippet, 3 things were new to me: the `match(...)`, "
-#~ "`split(...)` and `for () {}`. The only other function I have ever used was "
-#~ "`gsub(...)`, but these new felt similar enough that I could almost guess "
-#~ "their behaviour. `match(...)` stores the matches of a regex on the given "
-#~ "array positionally, and `split(...)` stores the chunks in the given array."
-#~ msgstr ""
-
-#~ msgid ""
-#~ "As I experimented with [Neomutt](https://neomutt.org/), I wanted to keep "
-#~ "being able to enqueue emails for sending later, so that I didn't rely on "
-#~ "having an internet connection."
-#~ msgstr ""
-
-#~ msgid ""
-#~ "#!/bin/sh -eu\n"
-#~ "\n"
-#~ "F=\"$1\"\n"
-#~ "\n"
-#~ "rcpt=\"$(awk '\n"
-#~ " match($0, /^(To|Cc|Bcc): (.*)$/, m) {\n"
-#~ " split(m[2], tos, \",\")\n"
-#~ " for (i in tos) {\n"
-#~ " print \"--mail-rcpt \" tos[i]\n"
-#~ " }\n"
-#~ " }\n"
-#~ "' \"$F\")\"\n"
-#~ "\n"
-#~ "if grep -qE '^From: .*<addr@server1\\.org>$' \"$F\"; then\n"
-#~ " curl \\\n"
-#~ " -s \\\n"
-#~ " --url smtp://smtp.server1.org:587 \\\n"
-#~ " --ssl-reqd \\\n"
-#~ " --mail-from addr@server1.org \\\n"
-#~ " $rcpt \\\n"
-#~ " --user 'addr@server1.org:my-long-and-secure-passphrase' \\\n"
-#~ " --upload-file \"$F\"\n"
-#~ "eliif grep -qE '^From: .*<addr@server2\\.org>$' \"$F\"; then\n"
-#~ " curl \\\n"
-#~ " -s \\\n"
-#~ " --url smtp://smtp.server2.org:587 \\\n"
-#~ " --ssl-reqd \\\n"
-#~ " --mail-from addr@server2.org \\\n"
-#~ " $rcpt \\\n"
-#~ " --user 'addr@server2.org:my-long-and-secure-passphrase' \\\n"
-#~ " --upload-file \"$F\"\n"
-#~ "else\n"
-#~ " echo 'Bad \"From: \" address'\n"
-#~ " exit 1\n"
-#~ "fi\n"
-#~ msgstr ""
--
cgit v1.2.3